top of page

Our products

BRASS MANIFOLDS WITH VALVES

COLLETTORI ED02022023-2.jpg

The valves allow to close the water circuit without interrupting the entire installation.

Manifolds with valves have made plumbing systems more practical and professional, through the exclusion of each branch of the cold or hot water distribution network by closing the relevant valve The REXPO company proposes two types of manifolds, the first has a flat profile at the end of the G 1/2 fitting, it is designed to be used with the female loose fitting 16x1/2”F. While the second (called RETUBE) is designed to be used with compression fittings by a special adapter REXPO patented.

BRASS SLIDING FITTINGS

RACCORDERI SCORREVOLI ED02022023-2.jpg

Quick and easy connection using a brass sliding fittings tool

In plumbing installations, the brass sliding fitting is the essential product for the assembly of the elements necessary for your thermo-hydraulic circuit.

This type of fitting is used by professional plumbers in all plumbing or heating installations, no technical training is required to use them.

The fittings offered by our company are made in brass, in accordance with European standards and assembled under our control and our technical drawings, this represents a warranty of quality.

GENERAL SCREW BRASS FITTINGS

RACCORDERIA GENERALE ED02022023-2.jpg

Fittings required for all types of assembly or connection in plumbing and heating systems.

In heating plumbing systems, brass screw fittings are used everywhere in fitting types and connections. They can be sealed with Teflon paste or tape.

REXPO proposes a wide range of items such as: sleeve, nipple, elbow, tee, reduction, cap, ...

COMPRESSION FITTINGS

RACCORDERI A COMPRESSIONE ED02022023-2.jpg

PER pipe connection without specific tools.

The compression fittings allow the connection without specific tools, our company proposes an economic range such as EQUAL TEE 16X16X16, FEMALE UNION 16X1/2"F, MALE UNION 16X1/2"M and EXTRACTABLE FEMALE ELBOW 16X1/2"F

BALL VALVES

VALVOLE A SFERA.jpg

In a plumbing installation, ball valves have become essential items. Depending on the uses, they are used to stop the flow of water in general to the entire building or to a specific part of the network. While it is true that the installation of the ball valves is quite simple, attention must be paid to the quality for a professional and above all safe installation.

REXPO proposes a range of simple and practical ball valves to use, through the long butterfly handle. They have been designed from resistant and particularly robust materials. They are therefore durable, thus ensuring the safety of all installations.

BRASS TAPS

RUBINETTI D'ARRESTO.jpg

The tap is part of a house's water system and is required to shut off the water supply. It can be placed in the kitchen, bathroom or laundry, where the water system passes. The tap is functional for the maintenance of the plumbing installation over time.

In addition, The taps are still used today in the connection of certain household appliances, in particular the dishwasher and the washing machine. Thus, no need to deprive the entire home of water, in the event of work on one of these devices

REXPO proposes an economical and functional range

  • Facebook
  • Twitter
  • LinkedIn

©2019 di Il mio Sito. Creato con Wix.com

bottom of page